Search

[Firmware Update] DR590W Series (v.1.002) and DR590 Series (v.1.005)

New firmware is available for the DR590W Series (version 1.002) and DR590 Series (version 1.005) dashcams.

MODELS CONCERNED:

  • DR590W Series (DR590W-1CH, DR590W-2CH, DR590W-2CH IR)
  • DR590 Series (DR590-1CH, DR590-2CH, DR590-2CH IR)

WHAT’S NEW:

DR590W Series

Version 1.002:
1) Wi-Fi is now OFF by default. To activate Wi-Fi, tap the Wi-Fi/Format button. You can turn Wi-Fi Auto Turn Off ON/OFF in the settings. 
2) Japanese language only: fixes the color saturation issue occurring specifically when setting language to Japanese. 

※ Compatible software version:
BlackVue App:  Android v2.73  /  iOS v2.73 and up.
BlackVue Viewer:  Windows v1.20  /  Mac v1.21 and up.

 

DR590 Series

Version 1.005:
Japanese language only: fixes the color saturation issue occurring specifically when setting language to Japanese. 
Note: feel free to skip this update if your dashcam’s language is not set to Japanese. 

※ Compatible software version:
BlackVue Viewer:  Windows v1.20  /  Mac v1.21 and up.

 

Important:

Make sure to use the latest versions of the BlackVue Viewer and App for full compatibility when installing a new firmware version.

 

How to upgrade:

Go to the DOWNLOADS page to access the latest firmware and installation instructions.

You can also use the BlackVue App (DR590W Series) to download the firmware to your mobile device and do a Firmware Over-The-Air upgrade via the BLACKVUE WI-FI menu. Tip: make sure to download the firmware before you connect to your BlackVue in Wi-Fi (since the BlackVue won’t give you the internet connection necessary to download the firmware). If you are already connected to your BlackVue, then disconnect first, download the firwmare, then connect to the BlackVue’s Wi-Fi again. 

 

Share your feedback and suggestions

If you have suggestions for new features and improvements, feel free to join our Community hosted in the BlackVue Help Center

Thank you!

BLOG Search

ARCHIVES